Please take a look at our new products, these are avaiable now.

 

Ching Coatings our new

Industrial Polyaspartic Coating.

 

Properties

  • Solvent free 2 component PAS single coat paint/topcoat (VOC content 65 g/l)
  • Thick film application of 100 - 150 microns in one coat
  • Very fast drying, regardless of film thisckness and weather conditions such as low temperatures. (below 5 degrees) and or higher
  • Good light fastness and weather resistance plus excellent anti corrosive properties when used in combination with a primer
  • High mechanical resistance such as impact resistance and abrasion resistance
  • High chmical resistance to organic solvents, fuels, oils (fabrication, hydraulic and transformer oils and various acids

Benefits

  • economic, fast drying thick film system which results in muchshorter application times
  • Providing cost savings on process times through increased through put
  • Competitive cost per square meter
  • Less wear on spraying equipment by reduction in litreage usage
  • Reduced DFT provide the same level of anticorrosive protection where other higher DFT thicknesses provide E.g DFT of 280 microns give ISO C5I-H, 20340, CX offshore levels of protection
  • Quick handling times
  • Solvent free, environmentally friendly thick film ssystem with high anti corrosive properties and therefore high sustainability

Primers

  • ESD 182 Ching EP Primer - Fast 2K curing EP Primer for steel structures in heavy corrosive environments, use at low temperatures down to 3 degrees C.
  • ESD 152 Ching EP Zinc Dust Primer - Fast drying 2K zinc dust primer with high anti corrosive protection, leaves 94 percent of the zinc on the substrate, for steel structures in heavy corrosive environments, use at low temperatures down to 3 degrees C.

If you would like some further information on the above Polyaspartic one and two coat systems please do not hesitate to use the contact page of directly by phone.